What tempers of Monel 400 spring wire are available?

Monel 400 spring wire ships in five cold-worked tempers under ASTM B164 Table 2: annealed (soft), quarter hard, half hard, hard and spring. Annealed wire holds about 70 ksi tensile and 35 percent elongation for forming and weld-rod stock. Spring temper runs about 130 to 145 ksi tensile with much lower elongation, used for stressed springs in HF acid valves, brackish water mesh and marine instrument coils. TorqBolt stocks 0.5 mm to 10 mm diameter on standard coil weights.

What is ERNiCu-7 welding wire?

ERNiCu-7 is the AWS A5.14 grade designation for the Monel 400 nickel-copper welding filler wire used for GTAW and GMAW of UNS N04400 plate, pipe, forgings and bolting. Chemistry mirrors ASTM B164: nickel plus cobalt 62 to 69 percent, copper 26 to 32 percent, with controlled titanium and aluminium for weld-pool deoxidation. Common dimensions are 1.6 mm, 2.0 mm, 2.4 mm and 3.2 mm bare rod cut to 914 mm for TIG and 0.9 mm, 1.0 mm, 1.2 mm spool for MIG.

What spool weights are stocked for Monel 400 welding wire?

Monel 400 ERNiCu-7 spool weights: 4.5 kg, 11.3 kg and 22.7 kg metal spools for MIG sub-arc, plus 5 kg cardboard cartons for 914 mm cut TIG rods. Standard packing is moisture-sealed polythene with desiccant, ASTM A604 vacuum-fusion hydrogen control where required for high-restraint root passes. Each spool is heat-numbered and ships with EN 10204 type 3.1 mill certificate; type 3.2 with third-party witness for NORSOK and sour-service repair work.

What is the chemistry of Monel 400 wire per ASTM B164?

ASTM B164 sets UNS N04400 wire chemistry at nickel plus cobalt 63 percent minimum, copper 28 to 34 percent, iron 2.5 percent maximum, manganese 2.0 percent maximum, carbon 0.3 percent maximum, silicon 0.5 percent maximum and sulphur 0.024 percent maximum. ERNiCu-7 welding wire follows the same envelope with tightened titanium and aluminium for weld-pool deoxidation. Free-machining Monel R-405 (N04405) at 0.025 to 0.060 percent sulphur is bar stock only and is not used for wire.

0091-22-66157017

info@torqbolt.com

Home

Monel 400 Draht — UNS N04400 nach ASTM B164

Monel 400 Draht (UNS N04400) nach ASTM B164 für Federn, Geflecht, Schweißzusatz (ERNiCu-7), Sieb-Anwendungen. Durchmesser 0,1-10 mm in Spulen oder geraden Längen.

Chemische Zusammensetzung

Element	Bereich (Gew.-%)
Nickel (Ni)	63 min
Copper (Cu)	28 - 34
Iron (Fe)	2.5 max
Manganese (Mn)	2.0 max
Silicon (Si)	0.50 max
Carbon (C)	0.30 max

Mechanische Eigenschaften

Eigenschaft	Wert (min)
Tensile / Zugfestigkeit / Carico rottura / Résistance traction	70 ksi / 485 MPa
0.2% yield	28 ksi / 195 MPa
Elongation	35%
Hardness HRB	60-80

Anwendungen

Federn (Korrosionsschutz-Federn)
Geflecht für Filter / Siebe
Schweißzusatz ERNiCu-7 (Monel 60)
Marine-Käfige + Korbgeflecht
Brückenkabel-Verstärkung

Normen

ASTM B164
AWS A5.14 (welding wire)
EN 10204 3.1/3.2

Häufige Fragen

Angebot in 24 Stunden mit EN 10204 3.1 oder 3.2 Prüfbescheinigung.

Email: info@torqbolt.com / WhatsApp: +91-22-66157017

Monel 400 Draht — UNS N04400 nach ASTM B164

Chemische Zusammensetzung

Mechanische Eigenschaften

Anwendungen

Normen

Häufige Fragen

Verwandte Seiten

Specifications

Surface Treatments

Certifications

About Us

Satisfaction Survey