What is Monel 400 sheet?

Monel 400 sheet is rolled nickel-copper alloy UNS N04400 supplied per ASTM B127 in thicknesses 0.5 to 4.75 mm. The alloy carries 63 percent minimum nickel and 28 to 34 percent copper, ships in hot-rolled annealed or cold-rolled annealed condition, and is specified for hydrofluoric acid service, brackish and marine duty, and concentrated sodium hydroxide vessels.

What is the difference between Monel 400 sheet and Monel 400 plate?

ASTM B127 sets the thickness break at 4.75 mm (0.1875 in). Product at or below 4.75 mm is classified as sheet; product above 4.75 mm is plate. Strip is a sub-form of sheet at 0.51 mm and thinner with a width ceiling of 610 mm. The chemistry, mechanical minima and certification regime are common across the three forms.

Can Monel 400 sheet be bent and formed?

Yes. Annealed Monel 400 sheet bends to a minimum inside radius of one thickness (1t) for 90 degree bends up to 3 mm and 1.5 t for 4 to 4.75 mm. Springback is higher than carbon steel because the elastic modulus is 179 GPa. The alloy work-hardens; cold reductions beyond 30 percent require an intermediate anneal at 870 to 980 degrees Celsius followed by water quench.

What is the typical Monel 400 sheet thickness?

Stocked Monel 400 sheet thicknesses are 0.5, 0.6, 0.8, 1.0, 1.2, 1.5, 2.0, 2.5, 3.0, 4.0 and 4.75 mm. Standard width is 1000, 1219 and 1500 mm; standard length is 2000, 2440, 3000 and 6000 mm. ASTM B127 tolerances apply by thickness band; full tolerance schedule on the product certificate.

0091-22-66157017

info@torqbolt.com

Home

Monel 400 Feinblech — UNS N04400 nach ASTM B127

Monel 400 Feinblech (UNS N04400) ist das dünnere Walzwerksprodukt nach ASTM B127, Dicken 0,6-6 mm. Für Verkleidungen, Wärmetauscher-Trennwände, gestanzte Komponenten in HF- und Meerwasserservice.

Chemische Zusammensetzung

Element	Bereich (Gew.-%)
Nickel (Ni)	63 min
Copper (Cu)	28 - 34
Iron (Fe)	2.5 max
Manganese (Mn)	2.0 max
Silicon (Si)	0.50 max
Carbon (C)	0.30 max

Mechanische Eigenschaften

Eigenschaft	Wert (min)
Tensile / Zugfestigkeit / Carico rottura / Résistance traction	70 ksi / 485 MPa
0.2% yield	28 ksi / 195 MPa
Elongation	35%
Hardness HRB	60-80

Anwendungen

Wärmetauscher-Trennwände
Stanzteile für Marine-Hardware
Verkleidungen für HF-Tanks
Dichtungsverstärkungen
Naval-Schaltschrank-Komponenten

Normen

ASTM B127
ASME SB-127
EN 10204 3.1/3.2

Häufige Fragen

Angebot in 24 Stunden mit EN 10204 3.1 oder 3.2 Prüfbescheinigung.

Email: info@torqbolt.com / WhatsApp: +91-22-66157017

Monel 400 Feinblech — UNS N04400 nach ASTM B127

Chemische Zusammensetzung

Mechanische Eigenschaften

Anwendungen

Normen

Häufige Fragen

Verwandte Seiten

Specifications

Surface Treatments

Certifications

About Us

Satisfaction Survey