What is Monel 400 sheet?

Monel 400 sheet is rolled nickel-copper alloy UNS N04400 supplied per ASTM B127 in thicknesses 0.5 to 4.75 mm. The alloy carries 63 percent minimum nickel and 28 to 34 percent copper, ships in hot-rolled annealed or cold-rolled annealed condition, and is specified for hydrofluoric acid service, brackish and marine duty, and concentrated sodium hydroxide vessels.

What is the difference between Monel 400 sheet and Monel 400 plate?

ASTM B127 sets the thickness break at 4.75 mm (0.1875 in). Product at or below 4.75 mm is classified as sheet; product above 4.75 mm is plate. Strip is a sub-form of sheet at 0.51 mm and thinner with a width ceiling of 610 mm. The chemistry, mechanical minima and certification regime are common across the three forms.

Can Monel 400 sheet be bent and formed?

Yes. Annealed Monel 400 sheet bends to a minimum inside radius of one thickness (1t) for 90 degree bends up to 3 mm and 1.5 t for 4 to 4.75 mm. Springback is higher than carbon steel because the elastic modulus is 179 GPa. The alloy work-hardens; cold reductions beyond 30 percent require an intermediate anneal at 870 to 980 degrees Celsius followed by water quench.

What is the typical Monel 400 sheet thickness?

Stocked Monel 400 sheet thicknesses are 0.5, 0.6, 0.8, 1.0, 1.2, 1.5, 2.0, 2.5, 3.0, 4.0 and 4.75 mm. Standard width is 1000, 1219 and 1500 mm; standard length is 2000, 2440, 3000 and 6000 mm. ASTM B127 tolerances apply by thickness band; full tolerance schedule on the product certificate.

0091-22-66157017

info@torqbolt.com

Home

Feuille Monel 400 — UNS N04400 selon ASTM B127

La feuille Monel 400 (UNS N04400) est le produit laminé mince selon ASTM B127, épaisseurs 0,6-6 mm. Pour revêtements, cloisons d'échangeurs de chaleur, composants emboutis en service HF et eau de mer.

Composition chimique

Élément	Plage (% en poids)
Nickel (Ni)	63 min
Copper (Cu)	28 - 34
Iron (Fe)	2.5 max
Manganese (Mn)	2.0 max
Silicon (Si)	0.50 max
Carbon (C)	0.30 max

Propriétés mécaniques

Propriété	Valeur (min)
Tensile / Zugfestigkeit / Carico rottura / Résistance traction	70 ksi / 485 MPa
0.2% yield	28 ksi / 195 MPa
Elongation	35%
Hardness HRB	60-80

Applications

Cloisons d'échangeurs de chaleur
Pièces embouties matériel marin
Revêtements pour réservoirs HF
Renforts de joints
Composants tableaux navals

Normes

ASTM B127
ASME SB-127
EN 10204 3.1/3.2

Questions fréquentes

Devis en 24h avec certification EN 10204 3.1 ou 3.2.

Email: info@torqbolt.com / WhatsApp: +91-22-66157017

Pages connexes

Xylan 1070 / 1014 / 1400 / 1424

Xylar 2 / 101

Geomet 321 / 500 / 720

SermaGard 1105 / 1280

Dacromet 320 / 500

TakeCoat 1000 Ceramic

Delta Tone/Seal

Magnigard

MolyKote

Sherardized

Zinc-Cobalt (ASTM B840)

Zinc-Nickel (ASTM B841)

ISO 9001 - 2015 Certified
PED 2014/68/EC
NACE MR0175/ISO 15156-2
NORSOK M-650
DFAR
MERKBLATT AD 2000 W2/W7/W10

Questions? Contact us.

Showcase of our Microsites.

Feuille Monel 400 — UNS N04400 selon ASTM B127

Composition chimique

Propriétés mécaniques

Applications

Normes

Questions fréquentes

Pages connexes

Specifications

Surface Treatments

Certifications

About Us

Satisfaction Survey