What Monel 400 fasteners do you stock?

TorqBolt stocks the full nickel-copper bolting set in Mumbai - hex bolts, heavy hex bolts, socket cap screws, stud bolts, hex nuts, heavy hex nuts, lock nuts, plain and spring washers, threaded rod, anchor and foundation bolts. Bolts to ASTM F468 Class A or B; nuts to ASTM F467 Class A or B; bar input per ASTM B164; specials forged from ASTM B564 stock.

What size range of Monel 400 fasteners is available?

Imperial 1/4 in. through 1-1/2 in. ex stock, 1-3/4 in. and 2 in. on indent from B564 forging billet. Metric M6 through M40 standard, M48 through M64 on indent. Threaded rod in 1 m / 3 m and 3 ft / 6 ft / 12 ft mill lengths. Studs from 1.5 in. to 36 in. length, longer on indent. Threading per ASME B1.1 UNC, UNF or ISO metric coarse / fine.

Are Monel 400 fasteners NACE MR0175 certified for sour service?

Yes. ASTM F468 caps hardness at 25 HRC across all classes and diameters, tighter than the NACE MR0175 35 HRC sour-service ceiling for nickel-copper. The bolting clears the hardness gate by design. Sour-service shipments carry EN 10204 type 3.2 with the NACE MR0175 / ISO 15156-3 compliance statement on the MTC.

Why are Monel 400 fasteners priced higher than stainless steel?

Monel 400 carries 63 to 70 percent nickel and 28 to 34 percent copper against 10 to 14 percent nickel in SS 316L, so raw-material input cost runs 4 to 6 times higher per kilogram, with smaller bolting heats adding conversion cost. The premium pays back in HF acid, sour gas and marine duty where stainless and copper alloys fail in service.

0091-22-66157017

info@torqbolt.com

Home

Hub elementi di fissaggio Monel 400 (UNS N04400)

Elementi di fissaggio Monel 400 (UNS N04400) — viti, dadi, prigionieri, rondelle e bulloni di ancoraggio in materiale UNS N04400 nichel-rame. Eccellente resistenza alla corrosione in HF, acqua di mare e acidi riducenti.

Composizione chimica

Elemento	Intervallo (% in peso)
Nickel (Ni)	63 min
Copper (Cu)	28 - 34
Iron (Fe)	2.5 max
Manganese (Mn)	2.0 max
Silicon (Si)	0.50 max
Carbon (C)	0.30 max

Proprietà meccaniche

Proprietà	Valore (min)
Tensile / Zugfestigkeit / Carico rottura / Résistance traction	70 ksi / 485 MPa
0.2% yield	28 ksi / 195 MPa
Elongation	35%
Hardness HRB	60-80

Applicazioni

Impianti alchilazione HF
Recipienti pressione acqua di mare
Serbatoi acidi riducenti
Applicazioni strutturali marine
Flange pompe acqua salmastra

Normative

ASTM F468
ASTM B164
ASTM A194 (nuts)
ASTM F436 (washers)

Domande frequenti

Preventivo in 24 ore con certificazione EN 10204 3.1 o 3.2.

Email: info@torqbolt.com / WhatsApp: +91-22-66157017

Pagine correlate

Xylan 1070 / 1014 / 1400 / 1424

Xylar 2 / 101

Geomet 321 / 500 / 720

SermaGard 1105 / 1280

Dacromet 320 / 500

TakeCoat 1000 Ceramic

Delta Tone/Seal

Magnigard

MolyKote

Sherardized

Zinc-Cobalt (ASTM B840)

Zinc-Nickel (ASTM B841)

ISO 9001 - 2015 Certified
PED 2014/68/EC
NACE MR0175/ISO 15156-2
NORSOK M-650
DFAR
MERKBLATT AD 2000 W2/W7/W10

Questions? Contact us.

Showcase of our Microsites.

Hub elementi di fissaggio Monel 400 (UNS N04400)

Composizione chimica

Proprietà meccaniche

Applicazioni

Normative

Domande frequenti

Pagine correlate

Specifications

Surface Treatments

Certifications

About Us

Satisfaction Survey